Nor-Maali´s high volume solids polyurethane coating Normafine 40 HS – faster drying at lower temperatures

2/3/2023

Painting process cost reduction is currently being considered in many industrial paint shops. How to save energy without compromising quality and speed? Painting costs can be influenced by e.g. with the drying temperature of the paint and the number of layers of the painting system. The right product choice is therefore a very important part of the overall cost of the process. In a problematic energy situation, Normafine 40 HS is a cost-effective option for both topcoat and direct-to-metal coating.

Faster drying at lower temperatures

Many operators are currently trying to reduce the painting costs, e.g. by lowering the temperature of the paint shop and reducing the use of ovens.

Normafine 40 HS dries fast both at room temperature and at lower temperatures. The product works even at 0 °C. The surface of Normafine 40 HS is hard enough to be packed the next morning after painting. The need for touch-up painting is reduced.

Nor-Maali´s Normafine 40 HS – faster drying at lower temperatures

Nor-Maali´s polyurethane coating Normafine 40 HS.

Direct-to-metal coating for C3 corrosivity category

One way to reduce painting costs is to change the painting system of several layers of paint to a single-coat system. In this case too, Normafine 40 HS offers the user an important advantage.

Normafine 40 HS contains anti-corrosion pigments and can be used as a direct-to-metal coating in corrosivity categories C2-C3. The product meets as a single coat the corrosion class requirements of C3-M with a 120 µm DFT. In addition to the anticorrosion properties, Normafine 40 HS offers good weather resistance as a polyurethane coating. In epoxy-polyurethane systems, Normafine 40 HS is used with an epoxy primer in corrosion categories C2-C5.

A cost-effective polyurethane coating for the painting process

The painting properties of Normafine 40 HS are very good and the coating is easy to spray. The spray fan is even and during the spraying forming of dry spray is minimal. It is easy to spray high film thicknesses with Normafine 40 HS (160 μm DFT).

If you are looking for a cost-effective high volume solids semi-gloss polyurethane coating, you have found it: Normafine 40 HS is designed for general steel structures and machinery and equipment. The product works even in more challenging conditions and guarantees a reliable end result.

Nor-Maali´s Normafine 40 HS – faster drying at lower temperatures

Normafine 40 HS painted by Jämsän Maalimestarit. (Image: Jämsän Maalimestarit)

Why to choose Normafine 40 HS?

  • FAST DRYING – ALSO AT LOWER TEMPERATURES
  • HIGH VOLUME SOLIDS – LOWER VOC CONTENT
  • DURABLE SURFACE – CORROSION-RESISTANT DIRECT-TO-METAL COATING FOR THE DESIRED CORROSIVITY CATEGORY
  • EASY TO SPRAY – HIGH FILM THICKNESSES (160 µm DFT)
  • COST EFFECTIVE PAINTING – FAST PAINTING PROCESS WITH HIGH SOLIDS DIRECT-TO-METAL COATING

Contact our sales for more info.

Nor-Maali´s Normafine 40 HS – faster drying at lower temperatures

The Pipe bridge manufactured by Kavamet is painted with Normafine 40 HS.

Facts behind the surface: NORMAFINE 40 HS

  • SEMI-GLOSS, HIGH VOLUME SOLIDS ACRYLIC POLYURETHANE COATING
  • USE AS A TOPCOAT OR DIRECT-TO-METAL COATING
  • GENERAL STEEL STRUCTURES, MACHINERY AND EQUIPMENT IN ENVIRONMENTAL CLASSES C2-C3
  • VOLUME SOLIDS: 66%
  • VOC: 300 G/L
  • MIXING RATIO: 9:1
  • POT-LIFE: 1 H 30 MIN
  • COLOURS: RAL, NCS S, KY AND SSG

Nor-Maali’s Normafine 40 HS – A Reliable Choice for Colder Conditions

31/10/2024 As autumn cools down and winter approaches, it's good to consider which coatings best suit for industrial painting in cold conditions. Cold weather can pose challenges for painting and often increases costs, but with the right product selection, significant savings can be achieved without compromising quality. The drying temperature of the paint and the number of coating layers directly impact the process's cost-efficiency. In this context, Nor-Maali’s Normafine 40 HS is an excellent choice—a high-solids polyurethane coating that cures even in low temperatures and functions effectively as a direct-to-metal coating solution.

More Efficient Industrial Painting with Nor-Maali’s Semi-Gloss Normathane 50 FD and Norecryl 50

28/9/2024 Introducing two premium solution from Nor-Maali’s product range designed to enhance your coating process and provide long lasting protection: Normathane 50 FD and Norecryl 50. These semi-gloss coatings are suitable for a variety of applications, including general steel structures and machinery & equipment, both indoors and outdoors. Both products have their own unique properties.

Employee Spotlight: Oü Nor-Maali’s Aleksandr Radtsenko

16/9/2024 Aleksandr Radtsenko works as a Sales Manager at Oü Nor-Maali, covering Eastern Estonia and parts of the Tallinn region. As a member of the Oü Nor-Maali sales team, he offers knowledgeable and reliable service to our clients.

Nor-Maali Participates in the Central Chamber of Commerce’s Climate Program – Carbon Footprint Calculated

6/8/2024 Nor-Maali is participating the Central Chamber of Commerce's Climate Program, which began in January 2024. Nor-Maali is one of 218 companies selected for the program. The company's carbon footprint for scopes 1 and 2 has been calculated.

Nor-Maali´s Coatings Protect Mein Schiff 7 Steel Surfaces

6/8/2024 The luxury cruise ship Mein Schiff 7, built by Meyer Turku, was completed in early June. The ship's steel surfaces were protected with high-quality marine coatings supplied by Nor-Maali Oy, including Jotun products such as Jotamastic 90, Jotacote Universal N10, and Hardtop AX.