Nor-Maali’s new Norepox Aqua DTM is an ideal solution to enhance work safety and reduce VOC emissions

1/6/2021

Demanding conditions set high standards for industrial coatings. With Nor-Maali’s Norepox Aqua DTM you can reach the same corrosion protection level as with traditional solvent-based coatings. This green solution ensures a superior end-result!

Norepox Aqua DTM is designed for more environmentally friendly and safer painting, without compromising on technical properties. The fast-drying, water-borne, two component epoxy coating contains active anticorrosion pigments, which guarantees an excellent corrosion resistance.

Norepox Aqua DTM reaches the same corrosion protection level as solvent-based coatings of the same category

Today’s water-borne coating technologies are able to challenge the traditional industrial solvent-based counterparts. In fact, compared to the solvent-based coatings, the advanced water-borne coatings already reach the same corrosion protection performance and durability.

Norepox Aqua DTM is based on latest advanced water-borne technology. Thanks to this, Norepox Aqua DTM has excellent anticorrosion properties, as good as its solvent-based epoxy counterparts. A one coat system (DTM) of 120 µm DFT reaches corrosion category C3-M.

Nor-Maali’s new Norepox Aqua DTM is an ideal solution to enhance work safety and reduce carbon footprint

Steel beams sprayed with Norepox Aqua DTM.

User-friendly

Norepox Aqua DTM is safe both for the environment and for the painter. Since the coating barely contains flammable or explosive raw-materials, the risk of being exposed to hazardous substances minimizes significantly.

During the spraying forming of dry spray is minimal. The painted surface is always even and smooth. It also dries quickly at lower temperatures or in areas with limited ventilation.

Reducing VOC emissions is a challenge we must tackle together

Volatile Organic Compounds (VOCs) are one of the biggest causes of emissions. This is why, we in Nor-Maali are constantly developing more environmentally friendly products, which are as excellent in technical properties as their solvent-based counterparts. Since water-borne coatings evaporate mainly water into the air, they are clearly a greener choice.

Why to choose Norepox Aqua DTM?

  • EXCELLENT SPRAYING PROPERTIES
  • FAST DRYING EVEN IN LOWER TEMPERATURES
  • EXCELLENT CORROSION PROTECTION
  • SUPERIOR END-RESULT: SMOOTH SURFACE
  • MULTIPURPOSE – A PRIMER, TOP COAT, OR DIRECT-TO-METAL COATING
  • WATER-BORNE, GREEN, AND SAFE SOLUTION
Nor-Maali’s new Norepox Aqua DTM is an ideal solution to enhance work safety and reduce carbon footprint

Nor-Maali’s new Norepox Aqua DTM is an ideal solution to enhance work safety and reduce carbon footprint.

 

Norepox Aqua DTM

Facts behind the surface

  • SEMI-GLOSS, WATER-BORNE EPOXY COATING
  • USE AS A PRIMER, TOP COAT, OR DIRECT-TO-METAL COATING
  • FOR SELECTED INDUSTRIAL SEGMENTS: GENERAL STEEL STRUCTURES, MACHINERY AND EQUIPMENT IN ENVIRONMENTAL CLASSES C2-C4
  • VOLUME SOLIDS 50%
  • VOC: 62 G/L
  • MIXING RATIO: 4:1
  • POT LIFE: 1.5 H
  • SINGLE COAT 120 µm DFT: C3-M
  • AVAILABLE IN RAL AND NCS S SHADES

Learn more about the product from our sales experts.

Also read: Looking for environmental friendly industrial coating with ACT-approval? Nor-Maali’s water-borne Normadur Aqua DTM and Akvanor 100 SG are certified.

Nor-Maali’s Normafine 40 HS – A Reliable Choice for Colder Conditions

31/10/2024 As autumn cools down and winter approaches, it's good to consider which coatings best suit for industrial painting in cold conditions. Cold weather can pose challenges for painting and often increases costs, but with the right product selection, significant savings can be achieved without compromising quality. The drying temperature of the paint and the number of coating layers directly impact the process's cost-efficiency. In this context, Nor-Maali’s Normafine 40 HS is an excellent choice—a high-solids polyurethane coating that cures even in low temperatures and functions effectively as a direct-to-metal coating solution.

More Efficient Industrial Painting with Nor-Maali’s Semi-Gloss Normathane 50 FD and Norecryl 50

28/9/2024 Introducing two premium solution from Nor-Maali’s product range designed to enhance your coating process and provide long lasting protection: Normathane 50 FD and Norecryl 50. These semi-gloss coatings are suitable for a variety of applications, including general steel structures and machinery & equipment, both indoors and outdoors. Both products have their own unique properties.

Employee Spotlight: Oü Nor-Maali’s Aleksandr Radtsenko

16/9/2024 Aleksandr Radtsenko works as a Sales Manager at Oü Nor-Maali, covering Eastern Estonia and parts of the Tallinn region. As a member of the Oü Nor-Maali sales team, he offers knowledgeable and reliable service to our clients.

Nor-Maali Participates in the Central Chamber of Commerce’s Climate Program – Carbon Footprint Calculated

6/8/2024 Nor-Maali is participating the Central Chamber of Commerce's Climate Program, which began in January 2024. Nor-Maali is one of 218 companies selected for the program. The company's carbon footprint for scopes 1 and 2 has been calculated.

Nor-Maali´s Coatings Protect Mein Schiff 7 Steel Surfaces

6/8/2024 The luxury cruise ship Mein Schiff 7, built by Meyer Turku, was completed in early June. The ship's steel surfaces were protected with high-quality marine coatings supplied by Nor-Maali Oy, including Jotun products such as Jotamastic 90, Jotacote Universal N10, and Hardtop AX.