Jotatemp 250

Heat resistant glass flake reinforced epoxy composite coating

Paint type

Jotatemp 250 is a two component glass flake reinforced epoxy composite coating. Designed as a heat resistant coating, and it is resistant to low temperatures down to -196°C and high temperatures up to 250°C on carbon steel. Suitable for insulated and non insulated surfaces. Suitable for properly prepared carbon steel, stainless steel, alloyed steel (P91), galvanized steel and aluminium. It can be applied on hot substrates up to 150°C. Please refer to the application guide for more detailed information. This product may be used as a primer, mid coat or finish coat. It will offer proper corrosion protection at ambient conditions during construction and shut-down periods. The product passes the standard tests used for qualifying coatings preventing corrosion under insulation (CUI).

Typical uses

Protective:
Designed as corrosion protection for surfaces operating at elevated temperatures where extended protection against corrosion is desired. Particularly suited for use under insulation. Suitable for insulated and non insulated surfaces.

Technical data

Volume solids (vol.%) 70
Mass of solids (g/l) 1237
VOC-value (g/l) 283

Jotatemp 250 -technical data sheet

Download (PDF) 04/24
Download (PDF) 04/24
Download (PDF) 04/24

Jotatemp 250 -Application guide

Download (PDF) 09/22

Jotatemp 250 -MSDS Comp.A

Download (PDF) 13.09.2023
Download (PDF) 13.09.2023
Download (PDF) 13.09.2023
Download (PDF) 13.09.2023
Download (PDF) 13.09.2023
Download (PDF) 13.09.2023

Jotatemp 250 -MSDS Comp.B

Download (PDF) 13.09.2023
Download (PDF) 13.09.2023
Download (PDF) 13.09.2023
Download (PDF) 13.09.2023
Download (PDF) 13.09.2023
Download (PDF) 13.09.2023