MyStar was painted with coatings supplied by Nor-Maali Oy

3/1/2023

Rauma Marine Construction has delivered MyStar car and passenger ferry to its customer Tallink. Steel surface coatings were supplied by Nor-Maali Oy together with Jotun. Products used were e.g. Jotamastic 90, Hardtop XPF and Marathon IQ2.

Rauma Marine Constructions delivered a new car and passenger ferry MyStar to its customer Tallink, on December 7. MyStar is the largest car and passenger ferry built by Rauma Marine Constructions at the Rauma shipyard. The ship is 212 meters long and 30.6 meters wide. MyStar accommodates 2,800 passengers and 200 crew members and there is a freight capacity of 3,190 lane metres.

MyStar is one of the most environmentally friendly ships in the Baltic Sea. The ship’s main engines use LNG as the primary fuel, but in the future it is also possible to use biogas as fuel.

AS Tallink Grupp is an Estonian shipping company that operates passenger and freight transport in the northern Baltic Sea. The company operates on the Helsinki–Tallinn, Tallinn–Stockholm, Paldiski–Kapellskär and Riga–Stockholm shipping routes. The group’s subsidiaries, Finnish Tallink Silja Oy and Swedish Tallink Silja AB, operate the Helsinki–Stockholm and Turku–Stockholm routes under the Silja Line brand.

Steel surface coatings and technical support from Nor-Maali Oy

Coatings for steel surfaces on the ship were supplied by Nor-Maali Oy together with Jotun, the world’s largest marine coating supplier. Due to the high-quality products and inspection services supplied by Nor-Maali, MyStar received long-lasting paint surfaces.

MyStar’s steel frame consists of a total of 80 large blocks, most of which were manufactured in Rauma. Some of them were delivered to Rauma from Poland, where they were also painted.

The steel surfaces of other Tallink ships are also protected with Jotun coatings supplied by Nor-Maali. M/S Romantika (2002), M/S Victoria I (2004), M/S Galaxy (2006), M/S Star (2007), M/S Baltic Princess (2008) and M/S Baltic Queen (2009) built at Rauma and Helsinki shipyards were painted with Jotun products. In addition, in dockings, e.g. Silja Symphony and Silja Serenade are maintenance painted with Jotun products.

Premium products used on MyStar steel surfaces

Main products on steel surfaces were Jotamastic 90, Hardtop XPF and Marathon IQ2. Jotamastic 90 was used in several areas of the ship together with Hardtop XPF. Underwater hull was coated with Marathon IQ2.

Jotamastic 90 was used on several areas of the ship, such as topside and superstructures. Hardtop XPF was used as a topcoat on these areas. Read more about Jotamastic 90 here and about Hardtop XPF here.

Marathon IQ2 is Jotun´s breakthrough solution for ice-going vessels. It combines smoothness and toughness to provide the best hydrodynamic efficiency for ice breakers and ice-going vessels. Marathon IQ2 is an environmentally friendly and user safety product. It doesn´t contain phenol or solvents. Marathon IQ2 has improved application properties, it is applicable by single-feed standard airless spray. Read more about Marathon IQ2 here.

MyStar was painted with coatings supplied by Nor-Maali Oy

MyStar was painted with coatings supplied by Nor-Maali Oy. Photo: Rauma Marine Constructions.

Decks

In addition to the products mentioned, e.g. Resist 86 was used on cargo area, Barrier and Hardtop Flexi on external decks and Jota Armour on helicopter deck.

Resist 86 is moisture curing inorganic zinc ethyl silicate coating. It conforms to the compositional requirements of SSPC paint 20, level 1, ISO 12944-5 and AS/NZS 3750.15 1994. Resist 86 provides outstanding corrosion protection as a single coat or as part of a complete coating system. One of the most important features of the product is its mechanical strength, which makes Resist 86 an excellent choice for heavy-duty applications such as cargo areas.

Barrier is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 2. It provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments.

Hardtop Flexi is high solids, aliphatic acrylic polyurethane paint. It has a glossy finish with very good gloss retention. The coating is very flexible, it withstands impacts and has very good adhesion properties. Hardtop Flexi can be used both as a topcoat and as a direct-to-metal coating. The product is compliant with USA FDA Title 21, Part 175.300: approved for use with food, dry solids. Hardtop Flexi has a grain statement.

Jota Armour is a tough, abrasion-resistant polyamine cured epoxy coating, specially designed as an anti-skid coating for decks and walkways. Jota Armour combines a high solid, surface tolerant and abrasion-resistant epoxy coating with anti-skid aluminium oxide. The surface profile is rough and with a high coefficient of friction that provides exceptional non-slip properties for people and equipment. Jota Armour is pre-qualified in NORSOK coating systems (System no. 4).

Tanks

The products used in painting the tanks were e.g. Tankguard DW in potable water tanks, Jotacote Universal N10 in ballast water tanks and Marathon 2:1 in black and grey water tanks.

Tankguard DW is a solvent-free epoxy coating specially designed for drinking water tanks. It can be used as primer and finish coat in atmospheric and immersed environments. Tankguard DW has several approvals: It meets the requirements of NSF/ANSI 61-2014a Standard for Drinking Water System Components – Health Effects, requirements of BS 6920-1:2000 for contact with potable water and requirements of the Norwegian Institute of Public Health for use in contact with potable water. Tankguard DW is also in compliance with Federal Drug Authority, USA, FDA Title 21, Part 175.300, approved for exposure to dry foods and it meets the requirements of ANSI/AWWA standard C210-07: Suitable for water pipelines.

Jotacote Universal N10 is a quick drying polyamine cured epoxy coating. It is high solids, high build, abrasion resistant product. Jotacote Universal N10 also cures at low temperatures and it is designed to be used all year round in areas where fast dry to handle is required. Jotacote Universal N10 is PSPC approved for water ballast tanks and also meets the requirements of Norsok-system 3 due to its PSPC approval.

Special properties of Marathon 2:1 are excellent adhesion to the substrate, corrosion resistance and heat resistance (continuous seawater immersion at 70 °C). Marathon 2:1 also provides excellent resistance against numerous chemicals. The product is easy to paint and withstands even high film thicknesses without problems. This is important when painting confined tank spaces and it is not possible to spray from an optimal distance.

MyStar was painted with coatings supplied by Nor-Maali Oy

Photo: Tallink Silja

MyStar:

Tonnage: 50 000 GT
Length: 212,4 m
Beam: 30,6 m
Decks: 12
Speed: 27 kn
Ice class: 1A
Passengers: 2800

Nor-Maali’s Normafine 40 HS – A Reliable Choice for Colder Conditions

31/10/2024 As autumn cools down and winter approaches, it's good to consider which coatings best suit for industrial painting in cold conditions. Cold weather can pose challenges for painting and often increases costs, but with the right product selection, significant savings can be achieved without compromising quality. The drying temperature of the paint and the number of coating layers directly impact the process's cost-efficiency. In this context, Nor-Maali’s Normafine 40 HS is an excellent choice—a high-solids polyurethane coating that cures even in low temperatures and functions effectively as a direct-to-metal coating solution.

More Efficient Industrial Painting with Nor-Maali’s Semi-Gloss Normathane 50 FD and Norecryl 50

27/9/2024 Introducing two premium solution from Nor-Maali’s product range designed to enhance your painting process and provide long lasting protection: Normathane 50 FD and Norecryl 50. These semi-gloss coatings are suitable for a variety of applications, including general steel structures and machinery & equipment, both indoors and outdoors. Both products have their own unique properties.

Employee Spotlight: Oü Nor-Maali’s Aleksandr Radtsenko

16/9/2024 Aleksandr Radtsenko works as a Sales Manager at Oü Nor-Maali, covering Eastern Estonia and parts of the Tallinn region. As a member of the Oü Nor-Maali sales team, he offers knowledgeable and reliable service to our clients.

Nor-Maali´s Coatings Protect Mein Schiff 7 Steel Surfaces

10/7/2024 The luxury cruise ship Mein Schiff 7, built by Meyer Turku, was completed in early June. The ship's steel surfaces were protected with high-quality marine coatings supplied by Nor-Maali Oy, including Jotun products such as Jotamastic 90, Jotacote Universal N10, and Hardtop AX.

Nor-Maali Participates in the Central Chamber of Commerce’s Climate Program – Carbon Footprint Calculated

10/7/2024 Nor-Maali is participating the Central Chamber of Commerce's Climate Program, which began in January 2024. Nor-Maali is one of 218 companies selected for the program. The company's carbon footprint for scopes 1 and 2 has been calculated.