Marathon IQ2 – The unrivalled combination of smoothness and toughness through ice

1/6/2021

Marathon IQ2 is Jotun´s breakthrough solution for ice-going vessels. It offers combination of smoothness and toughness with improved application properties. Marathon IQ2 is an environmental friendly and user safety product. It doesn´t contain phenol or solvents.

Jotun has served the ice-going fleet since 1926. In 1996 Jotun launched Marathon IQ, a highly specialized product for protection of ice-going vessels. In 2018, with new technological advancements and learnings from customers and industry, Jotun re-developed Marathon IQ to further enhance solutions for ice-going vessels. Marathon IQ2 was launched.

Excellent ice slip properties and extended duration of smoothness

Polar regions offer the most extreme, harsh conditions, resulting in severe, continuous impact and abrasion on vessels operating in these waters. Standard epoxy coatings and ice coatings build up a roughness reducing hydrodynamic efficiency.

Marathon IQ2 combines smoothness and toughness to provide the best hydrodynamic efficiency for ice breakers and ice-going vessels. Marathon IQ2 is recognised as an abrasion resistant ice coating (LR Class).

Marathon IQ2 can deliver approximately 4.5% improvement in hydrodynamic efficiency beyond current ice coatings on the market.

Combination of the highest abrasion and impact resistance and flexural strength provides the toughest properties ensuring longer lasting smoothness. Low roughness profile enables low kinetic friction of coefficient (third party testing –Aker Arctic Technology). Marathon IQ2 offers estimated 50% reduction in overall roughness compared to current ice coatings.

The greener choice

Marathon IQ2 makes sense in every way. Not only is it the toughest and smoothest coating for ice-class vessels, it’s also phenol-free and solvent-free, making it the non-toxic, environmentally friendly choice of coating for ice-going vessels.

  • Disadvantages of free-phenol
    • Toxic when inhale
    • Causes burns
    • Mutagen (birth defects)
  • Free-phenol is EU Reach prohibited
  • Jotun Greensteps
    • Reducing hazardous materials
    • With introduction of Marathon IQ2, Jotun assortment will no longer contain any free-phenol.

Improved application properties

Marathon IQ2 offers reduced spraying complexity. It is applicable with standard airless spray instead of dual feed ja doesn´t require heating the components in the spray gun. Marathon IQ2 can be applied down to 5 °C. It has longer pot-life and shorter drying time compared to predecessor Marathon IQ. Spraying with Marathon IQ2 is more cost-effective.

Marathon IQ2 is Jotun´s breakthrough solution for ice-going vessels

Extension part of M/S Finntide was sprayed with Marathon IQ2. It is applicable with standard airless spray without heating the components.

Marathon IQ2 projects in Finland

Marathon IQ2 has been used in all newbuilding shipyards in Finland. For example, the new ferries, Wasaline´s Aurora Botnia for Vaasa-Umeå service and Tallink´s MyStar for Helsinki-Tallinn service build in Rauma Marine Constructions (RMC) are coated with Marathon IQ2.

Tommi Saarinen, Production Manager of painting contractor at RMC, Rauma, says that he is very satisfied with the product. “Marathon IQ2 can be sprayed without dual feed and does not require heating the components. The process is now much simpler. The fact that the process is simple also means that the costs are lower and the painting is more cost-effective. The HSE profile of the product is also a good addition. Marathon IQ2 doesn´t contain phenol or solvents. It is a better choice for both the user and the environment.”

“Marathon IQ2 can be sprayed without dual feed and does not require heating the components. The process is now much simpler. Painting is more cost-effective”, says Tommi Saarinen, Production Manager of painting contractor at RMC, Rauma.

Marathon IQ2 has also been used in several drydockings. M/S Finntide is one of Finnline Oyj´s vessels, which was lengthened in retrofit project. Hull was extended by 30 meters and the new part was coated with Marathon IQ2. Two other vessels, of total six vessels in retrofit-project, M/S Finnsun and M/S Finnsea, were in drydocking in the beginning of this year. Marathon IQ2 areas were in excellent condition. There were no damages in those areas.

Marathon IQ2 is Jotun´s breakthrough solution for ice-going vessels

Marathon IQ2 is Jotun´s breakthrough solution for ice-going vessels.

MARATHON IQ2:

  • DEVELOPED FOR ICE BREAKERS AND ICE-GOING VESSELS

  • SMOOTHEST SURFACE FOR ICE NAVIGATION

  • TOUGHEST ICE RESISTANT COATING

  • ENVIRONMENTAL FRIENDLY PRODUCT – PHENOL-FREE AND SOLVENT-FREE

  • IMPROVED APPLICATION PROPERTIES – APPLICABLE BY SINGLE-FEED STANDARD AIRLESS SPRAY

  • LR-CLASS APPROVED ICE RESISTANT COATING

 

MARATHON IQ2 TECHNICAL DATA SHEET

 

Nor-Maali Oy in Finland is a distributor and a licensed manufacturer for Jotun’s marine and protective coatings for Finland and Baltics States.

Sources:
https://jotunimages.azureedge.net/images/images/Marathon-IQ2-brochure_tcm84-146352.pdf
Jotun – Marathon IQ2 – Customer presentation – 23-04-2020

Nor-Maali’s Normafine 40 HS – A Reliable Choice for Colder Conditions

31/10/2024 As autumn cools down and winter approaches, it's good to consider which coatings best suit for industrial painting in cold conditions. Cold weather can pose challenges for painting and often increases costs, but with the right product selection, significant savings can be achieved without compromising quality. The drying temperature of the paint and the number of coating layers directly impact the process's cost-efficiency. In this context, Nor-Maali’s Normafine 40 HS is an excellent choice—a high-solids polyurethane coating that cures even in low temperatures and functions effectively as a direct-to-metal coating solution.

More Efficient Industrial Painting with Nor-Maali’s Semi-Gloss Normathane 50 FD and Norecryl 50

28/9/2024 Introducing two premium solution from Nor-Maali’s product range designed to enhance your coating process and provide long lasting protection: Normathane 50 FD and Norecryl 50. These semi-gloss coatings are suitable for a variety of applications, including general steel structures and machinery & equipment, both indoors and outdoors. Both products have their own unique properties.

Employee Spotlight: Oü Nor-Maali’s Aleksandr Radtsenko

16/9/2024 Aleksandr Radtsenko works as a Sales Manager at Oü Nor-Maali, covering Eastern Estonia and parts of the Tallinn region. As a member of the Oü Nor-Maali sales team, he offers knowledgeable and reliable service to our clients.

Nor-Maali Participates in the Central Chamber of Commerce’s Climate Program – Carbon Footprint Calculated

6/8/2024 Nor-Maali is participating the Central Chamber of Commerce's Climate Program, which began in January 2024. Nor-Maali is one of 218 companies selected for the program. The company's carbon footprint for scopes 1 and 2 has been calculated.

Nor-Maali´s Coatings Protect Mein Schiff 7 Steel Surfaces

6/8/2024 The luxury cruise ship Mein Schiff 7, built by Meyer Turku, was completed in early June. The ship's steel surfaces were protected with high-quality marine coatings supplied by Nor-Maali Oy, including Jotun products such as Jotamastic 90, Jotacote Universal N10, and Hardtop AX.